Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be achieved in just a few steps.

• Initially ensuring your red dot sight is turned on.
• Locate the small reset button on the rear of the sight.
• Utilize a thin tool to press and hold the reset switch for approximately 5 seconds.
• Let go the switch and your Holosun EPS Carry Red Dot sight will restart.
• Your red dot sight should now be reverted to its factory settings.

Restore Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it back to standard configuration is a breeze. more info First, locate the tiny button on the bottom of your optic. Then, keep pressed it for around ten seconds until you see a brief flash. Your Holosun EPS Carry is now returned to its factory settings, ready for accurate shooting.

restore Your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Press and hold the power button for approximately 7 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and verify your sight's functionality. If you encounter any further difficulties, don't hesitate to contactsupport team.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• First, Turn on your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, tap the power button once.
• The display will show a confirmation prompt indicating that the reset process is initiated.
• Permit the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reset your Holosun EPS Carry with a Factory Default Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the fix. This will set back your sight to its factory settings, clearing any custom configurations you've made. To perform this reset, adhere to these easy steps:

• Initially, find the reset lever on your EPS Carry.
• Next, engage a fine object, like a pen tip, to push the reset lever.
• As you hold the reset switch engaged, power on your EPS Carry.
• The sight will flash a message indicating that the reset is complete.

After the reset is finished, your EPS Carry will be returned to its factory settings.

Report this wiki page